SPX to MP2 Converter

Re-encode Speex speech into MPEG Audio Layer 2 online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output MP2 audio bitrate. If set to "Custom", the recommended range is ≥320 kbps with a maximum value of 384 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more

mp2

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Broadcast-Ready Output

Prepare your Speex voice recordings for broadcast by converting to MP2 — the standard codec for DAB and DVB systems.

Bitrate Control

Choose the exact MP2 bitrate for your broadcast chain — from low-bandwidth voice to higher-quality music transmission.

No Local Software

Encoding runs on our cloud infrastructure. No need to install broadcast tools just to produce an MP2 file from SPX.

How to convert SPX to MP2

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose mp2 or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your mp2 file right afterwards

About formats

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002
MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
Initial release: 1993

Frequently Asked Questions

Why convert SPX to MP2?

MP2 remains the standard for DAB radio and DVB television broadcasting. Converting SPX to MP2 prepares audio for broadcast workflows.

Is MP2 different from MP3?

Yes — MP2 uses MPEG Audio Layer 2 encoding, which is simpler but still preferred in European broadcasting over MP3.

What applications use MP2?

Broadcast equipment, DAB radio encoders, DVB systems, and professional playout software commonly work with MP2 audio.

Can I play MP2 on my computer?

VLC, foobar2000, and Winamp all handle MP2 playback. Windows Media Player may need an additional codec.

Is the conversion free?

Yes — standard SPX to MP2 conversions are free on convertio.tools.

SPX to MP2 Quality Rating

3.0 (1 votes)
You need to convert and download at least 1 file to provide feedback!