SPX to OPUS Converter

Upgrade from Speex to the modern Opus audio codec online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the Opus audio bitrate per channel. If set to "Custom", the Opus audio codec supports up to 256 kbit/s per channel with a recommended range of ≥64 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Successor Format

Opus is the official successor to Speex — converting SPX to OPUS gives your recordings a modern, future-proof container.

Superior Codec

Opus excels at every bitrate for both speech and music, making it the best general-purpose audio codec available today.

Private and Secure

Your SPX uploads are deleted immediately after processing. OPUS results are removed from servers within 24 hours.

How to convert SPX to OPUS

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose opus or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your opus file right afterwards

About formats

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002
Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012

Frequently Asked Questions

Why upgrade from SPX to OPUS?

Opus officially supersedes Speex. It handles both speech and music, delivers better quality at every bitrate, and has broader support.

Is Opus related to Speex?

Yes — Opus was co-developed by Xiph.Org, the same group behind Speex. Opus is the recommended successor for all Speex use cases.

What supports OPUS playback?

Firefox, Chrome, Edge, VLC, Android, and most modern audio applications support Opus natively. WebRTC also uses Opus.

Will quality improve?

At the same bitrate, Opus outperforms Speex significantly. Re-encoding cannot recover lost data, but Opus encodes more efficiently.

Can I batch convert SPX to OPUS?

Yes — upload multiple SPX files and they will all be encoded into Opus format in one batch.

SPX to OPUS Quality Rating

5.0 (1 votes)
You need to convert and download at least 1 file to provide feedback!