OPUS to MP2 Converter

Re-encode OPUS as MPEG Audio Layer 2 for broadcast

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output MP2 audio bitrate. If set to "Custom", the recommended range is ≥320 kbps with a maximum value of 384 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more

mp2

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Broadcast Codec

MP2 is mandatory for DAB radio and DVB TV — convert OPUS audio into the format broadcast systems require.

Precise Bitrate Control

Set the exact bitrate and sample rate your broadcast specification demands for MP2 output.

Cloud Encoding

The OPUS to MP2 conversion runs on our servers — no broadcast encoding software needed locally.

How to convert OPUS to MP2

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose mp2 or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your mp2 file right afterwards

About formats

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012
MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
Initial release: 1993

Frequently Asked Questions

Why convert OPUS to MP2?

MP2 is the required audio codec for DAB digital radio and DVB television. Broadcast workflows need MPEG Layer 2 audio streams.

What plays MP2?

VLC, Windows Media Player, broadcast playout systems, and professional video editing suites handle MP2 audio natively.

Is MP2 outdated?

Not in broadcasting — DAB radio and DVB TV continue to use MP2 as their primary audio codec worldwide.

What bitrate for broadcast?

DAB radio typically uses 192-256 kbps stereo MP2. DVB standards may require different rates depending on the channel.

Can I convert a batch?

Upload multiple OPUS files and encode them all to MP2 at once — prepare broadcast content efficiently.

OPUS to MP2 Quality Rating

4.3 (88 votes)
You need to convert and download at least 1 file to provide feedback!