HCOM to WV Converter

Encode HCOM audio as WavPack lossless compression

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.
Adjust the audio volume by selecting a number of decibels. For example, -10 dB decreases the volume by 10 decibels.

hcom

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
read more

wv

WavPack is an open-source audio codec created by David Bryant, with version 1.0 released on August 15, 1998. What sets WavPack apart is its unique hybrid mode: the encoder can simultaneously produce a compact lossy file and a separate correction file that, when combined, reconstruct the original PCM stream bit-for-bit. Users who need portability carry just the lossy file; those who want archival quality keep both. The codec handles PCM audio from 8-bit to 32-bit integer and 32-bit floating point, with sample rates up to 768 kHz — specifications broad enough for DSD content, which WavPack 5 added support for. Compression ratios in pure lossless mode typically reach 40 to 55 percent of the original size, competitive with FLAC and often slightly better on certain material. Multicore encoding in later versions dramatically speeds up processing on modern hardware. The open-source library ships under a BSD license and has been integrated into foobar2000, VLC, FFmpeg, and numerous other tools. WavPack also supports rich metadata through APEv2 tags, embedded cue sheets, and ReplayGain values, covering the organizational needs of even the most meticulous music library.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Lossless with Flexibility

WavPack preserves every detail from your HCOM source while offering flexible compression and a unique hybrid encoding option.

Classic Mac to Audiophile

Bridge vintage Macintosh HCOM audio into WavPack — a format respected by audio enthusiasts and lossless music collectors.

No Local Tools Needed

The WavPack encoding runs on our cloud servers. No need to install audio tools or codecs on your device.

How to convert HCOM to WV

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose wv or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your wv file right afterwards

About formats

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
Developer: Apple Computer
Initial release: 1985
WavPack is an open-source audio codec created by David Bryant, with version 1.0 released on August 15, 1998. What sets WavPack apart is its unique hybrid mode: the encoder can simultaneously produce a compact lossy file and a separate correction file that, when combined, reconstruct the original PCM stream bit-for-bit. Users who need portability carry just the lossy file; those who want archival quality keep both. The codec handles PCM audio from 8-bit to 32-bit integer and 32-bit floating point, with sample rates up to 768 kHz — specifications broad enough for DSD content, which WavPack 5 added support for. Compression ratios in pure lossless mode typically reach 40 to 55 percent of the original size, competitive with FLAC and often slightly better on certain material. Multicore encoding in later versions dramatically speeds up processing on modern hardware. The open-source library ships under a BSD license and has been integrated into foobar2000, VLC, FFmpeg, and numerous other tools. WavPack also supports rich metadata through APEv2 tags, embedded cue sheets, and ReplayGain values, covering the organizational needs of even the most meticulous music library.
Developer: David Bryant
Initial release: August 15, 1998

Frequently Asked Questions

What is WavPack?

WavPack is a lossless audio codec that also supports a unique hybrid mode — combining lossy and lossless data in separate files.

Why convert HCOM to WavPack?

WavPack preserves full audio quality with better compression than WAV. It supports metadata, multichannel audio, and very high bit depths.

What plays WV files?

Foobar2000, VLC, Winamp, and many audiophile-grade players support WavPack. It has a dedicated following in the lossless audio community.

Is WavPack better than FLAC?

Both are excellent lossless codecs. WavPack offers unique hybrid mode and broader bit depth support, while FLAC has wider device compatibility.

How much smaller than WAV?

WavPack typically compresses to 50-70% of WAV size while remaining perfectly lossless. Exact ratio depends on the audio content.