HCOM to AC3 Converter

Re-encode Macintosh HCOM audio into Dolby AC3 online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

The codec to encode the audio track. Codec "Without reencoding" copies the audio stream from the input file into output without re-encoding if possible.
Set the overall output AC3 (Dolby Digital) audio bitrate. If set to "Custom", the usable (and recommended) range is ≥160 kbps. The maximum bitrate is 640 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).

hcom

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
read more

ac3

AC3 is the file format associated with Dolby Digital, a perceptual audio coding technology from Dolby Laboratories. This lossy format encodes up to 5.1 channels of surround sound (left, center, right, left surround, right surround, and LFE) into a bitstream typically ranging from 192 to 640 kbps. The algorithm applies a modified discrete cosine transform with psychoacoustic analysis to discard audio information below the threshold of human perception, producing compact files without obvious quality loss. AC3 became the mandatory audio standard for DVD-Video and is widely used in Blu-ray discs, digital television broadcasts (ATSC), and streaming delivery. A primary advantage is multichannel surround capability, bringing cinematic spatial audio into home theater systems. The format also maintains excellent dialogue clarity through its dedicated center channel, ideal for film and television content. Widespread hardware decoder support in receivers, TVs, and set-top boxes means AC3 audio plays back reliably across an enormous installed base of consumer electronics.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Mac Audio to Dolby

Convert HCOM Macintosh audio to AC3 Dolby Digital — ready for media authoring, video editing, and home theater playback.

Instant Processing

HCOM files are compact, so the conversion to AC3 finishes in seconds without taxing your device.

Automatic Cleanup

Uploaded HCOM files are deleted after processing. AC3 outputs are purged from servers within 24 hours.

How to convert HCOM to AC3

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose ac3 or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your ac3 file right afterwards

About formats

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
Developer: Apple Computer
Initial release: 1985
AC3 is the file format associated with Dolby Digital, a perceptual audio coding technology from Dolby Laboratories. This lossy format encodes up to 5.1 channels of surround sound (left, center, right, left surround, right surround, and LFE) into a bitstream typically ranging from 192 to 640 kbps. The algorithm applies a modified discrete cosine transform with psychoacoustic analysis to discard audio information below the threshold of human perception, producing compact files without obvious quality loss. AC3 became the mandatory audio standard for DVD-Video and is widely used in Blu-ray discs, digital television broadcasts (ATSC), and streaming delivery. A primary advantage is multichannel surround capability, bringing cinematic spatial audio into home theater systems. The format also maintains excellent dialogue clarity through its dedicated center channel, ideal for film and television content. Widespread hardware decoder support in receivers, TVs, and set-top boxes means AC3 audio plays back reliably across an enormous installed base of consumer electronics.
Developer: Dolby Laboratories
Initial release: 1991

Frequently Asked Questions

Why convert HCOM to AC3?

AC3 is the standard for Dolby Digital surround sound used in DVDs, Blu-rays, and streaming. HCOM is a mono format limited to classic Mac systems.

Will the output be surround sound?

The source HCOM is mono audio. The AC3 file will contain mono content but in a container compatible with surround sound workflows.

What plays AC3 files?

VLC, MPC-HC, PotPlayer, and most home theater receivers handle AC3 natively. It is also embedded in many video container formats.

Is there quality loss?

AC3 uses lossy compression. Since HCOM is also a compressed format, the conversion preserves comparable audio quality at standard bitrates.

How long does conversion take?

HCOM files are typically small. The conversion to AC3 completes in just a few seconds on our servers.