HCOM to AMR Converter

Transcode Macintosh HCOM sound to AMR speech format

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

The AMR audio codec supports various bit rates ranging from 4.75 to 12.2 kbit/s with toll quality speech starting at 7.4 kbit/s.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

hcom

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
read more

amr

AMR (Adaptive Multi-Rate) is a compressed audio format optimized for speech, standardized by the European Telecommunications Standards Institute and adopted as a mandatory codec for GSM and 3G mobile networks. The codec dynamically switches between eight bit rates — from 4.75 to 12.2 kbps — depending on network conditions and background noise levels. When link quality drops, the encoder shifts to a lower rate, trading marginal clarity for transmission reliability. This adaptive mechanism is defined by the 3GPP specifications and represents one of the most widely deployed voice codecs globally, used in billions of mobile calls. The primary advantage is compression efficiency: one minute of AMR audio at 12.2 kbps occupies roughly 90 KB, practical for voice memos, voicemail, and MMS on bandwidth-constrained networks. Another benefit is built-in voice activity detection and comfort noise generation, reducing transmission during silence. While AMR is unsuitable for music due to its narrow bandwidth (300-3400 Hz), it excels at delivering intelligible speech under challenging network conditions.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Compact Speech Codec

AMR produces tiny files perfect for voice content — converting your HCOM speech recordings to a widely supported mobile format.

Cross-Era Bridge

Bring audio from classic Macintosh HCOM into AMR — bridging 1980s desktop computing and modern mobile voice technology.

Privacy Protected

Your HCOM files are erased after processing. All AMR output files are deleted within 24 hours from our servers.

How to convert HCOM to AMR

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose amr or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your amr file right afterwards

About formats

HCOM is a Huffman-coded audio format from the early Macintosh era, designed to shrink digitized sound for distribution on floppy disks and bulletin board systems when storage was precious and modems were slow. The encoder takes 8-bit unsigned PCM input, computes a frequency table of sample-delta values, and builds an optimal Huffman tree that replaces common deltas with short bit sequences. Compression ratios of 2:1 or better were typical for speech recordings, a meaningful saving when a 3.5-inch floppy held only 800 KB. Files were distributed as Macintosh resource forks and played through utilities like SoundApp and the BinHex ecosystem that defined Mac software exchange in the late 1980s. The format supported sample rates up to 22.255 kHz, matching the output capabilities of original Macintosh sound hardware. Tools such as SoX retain HCOM decoding support, ensuring that archived recordings remain accessible decades later. HCOM holds three practical advantages for preservation work: lossless compression that recovers the original samples exactly, a self-contained Huffman table embedded in each file for dependency-free decoding, and historical prevalence across thousands of vintage Mac sound archives.
Developer: Apple Computer
Initial release: 1985
AMR (Adaptive Multi-Rate) is a compressed audio format optimized for speech, standardized by the European Telecommunications Standards Institute and adopted as a mandatory codec for GSM and 3G mobile networks. The codec dynamically switches between eight bit rates — from 4.75 to 12.2 kbps — depending on network conditions and background noise levels. When link quality drops, the encoder shifts to a lower rate, trading marginal clarity for transmission reliability. This adaptive mechanism is defined by the 3GPP specifications and represents one of the most widely deployed voice codecs globally, used in billions of mobile calls. The primary advantage is compression efficiency: one minute of AMR audio at 12.2 kbps occupies roughly 90 KB, practical for voice memos, voicemail, and MMS on bandwidth-constrained networks. Another benefit is built-in voice activity detection and comfort noise generation, reducing transmission during silence. While AMR is unsuitable for music due to its narrow bandwidth (300-3400 Hz), it excels at delivering intelligible speech under challenging network conditions.
Initial release: 1999

Frequently Asked Questions

Why convert HCOM to AMR?

AMR is widely used for voice recordings on mobile devices. If your HCOM contains speech, AMR offers extremely compact storage with clear voice quality.

Is AMR suitable for music?

No. AMR is designed exclusively for speech. Music and complex sounds lose significant quality when encoded to AMR at its narrow bandwidth.

What plays AMR files?

VLC, QuickTime, and most Android devices play AMR natively. Many older feature phones also use AMR for voice memo recordings.

How small are AMR files?

Very small. AMR encodes speech at bitrates as low as 4.75 kbps, producing extremely compact files ideal for transmission and storage.

Is the process secure?

HCOM uploads are deleted right after conversion. AMR results are automatically removed from our servers within 24 hours.