SOU to SPX Converter

Quick SOU to SPX transformation — fully online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

sou

SOU is a raw audio format designation that functions as an alias for unsigned 8-bit PCM data (u8) in the SoX audio processing framework. Files with the .sou extension contain headerless, uncompressed audio samples stored as unsigned 8-bit integers — each byte represents a single amplitude value from 0 to 255, with 128 as the silence midpoint. Because there is no header, playback parameters such as sample rate and channel count must be specified externally. The default assumption is typically mono at 8000 Hz, though the data can represent any rate the recording hardware supported. The u8 encoding that SOU aliases is one of the simplest possible digital audio representations, predating structured audio containers like WAV and AIFF. Raw unsigned PCM was commonly produced by early sound cards and digitizers in the late 1980s and early 1990s, when storage constraints and limited processing power made headerless formats a practical choice. One advantage is absolute simplicity: SOU files can be read by any program capable of basic file I/O, with no parsing of container structures or metadata decoding required — useful for embedded systems, hardware diagnostics, and educational contexts where audio fundamentals are being explored. The format's minimal overhead also means that conversion to any modern container is lossless and instantaneous, since the raw PCM samples can be wrapped in a WAV or AIFF header without any transcoding.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Any Device

No platform restrictions. Convert your SOU audio to SPX on any operating system through a standard web browser.

Better Compatibility

SOU recordings become far more usable as SPX. The conversion unlocks very low bitrate capability that SOU cannot provide.

Privacy Protected

All uploaded files are handled securely — SOU inputs are removed after processing, and SPX outputs expire within 24 hours.

How to convert SOU to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

SOU is a raw audio format designation that functions as an alias for unsigned 8-bit PCM data (u8) in the SoX audio processing framework. Files with the .sou extension contain headerless, uncompressed audio samples stored as unsigned 8-bit integers — each byte represents a single amplitude value from 0 to 255, with 128 as the silence midpoint. Because there is no header, playback parameters such as sample rate and channel count must be specified externally. The default assumption is typically mono at 8000 Hz, though the data can represent any rate the recording hardware supported. The u8 encoding that SOU aliases is one of the simplest possible digital audio representations, predating structured audio containers like WAV and AIFF. Raw unsigned PCM was commonly produced by early sound cards and digitizers in the late 1980s and early 1990s, when storage constraints and limited processing power made headerless formats a practical choice. One advantage is absolute simplicity: SOU files can be read by any program capable of basic file I/O, with no parsing of container structures or metadata decoding required — useful for embedded systems, hardware diagnostics, and educational contexts where audio fundamentals are being explored. The format's minimal overhead also means that conversion to any modern container is lossless and instantaneous, since the raw PCM samples can be wrapped in a WAV or AIFF header without any transcoding.
Developer: SoX Contributors
Initial release: 1991
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

What makes SPX a better choice than SOU?

SOU suffers from legacy raw audio format without any container structure. SPX offers open-source and patent-free.

What can I use to play SPX?

You can open SPX with VLC, Audacity, Foobar2000, and Speex-compatible VoIP clients.

Is there quality loss from SOU to SPX?

The source SOU audio has inherently low fidelity. SPX conversion preserves what is there while adding broad compatibility.

Can I do this conversion from my phone?

Yes. The online converter is platform-independent — use it from any computer, tablet, or smartphone with a web browser.

Are there limits on SOU to SPX conversion?

Standard conversions work without restrictions for typical use. Premium plans provide additional speed and capacity for large workloads.

Is registration needed for this conversion?

No account is needed for standard conversions. Simply upload your SOU recording, choose SPX, and download the result.