TS to SPX Converter

Extract Speex Speech audio from TS recordings online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

ts

TS (MPEG Transport Stream) is a standard container format specified as part of the MPEG-2 systems layer (ISO/IEC 13818-1), standardized by the Moving Picture Experts Group in 1995. Transport streams are designed for communication and storage environments where data loss or corruption is possible, such as broadcast television, satellite transmission, and network streaming. The format divides content into fixed-size 188-byte packets, each carrying a 4-byte header with synchronization, error indication, and stream identification information. This packet structure enables receivers to rapidly resynchronize after signal interruptions, a critical capability for real-time broadcast delivery that distinguishes transport streams from program streams designed for reliable storage media. TS can multiplex multiple programs into a single stream, with Program Specific Information (PSI) tables describing the structure and content of each program. The format supports virtually any audio and video codec, though it most commonly carries MPEG-2 video, H.264, or HEVC alongside AAC, AC-3, or MPEG audio. TS is the backbone of digital television delivery worldwide, used by DVB, ATSC, and ISDB broadcasting standards as well as IPTV and OTT streaming services utilizing HTTP Live Streaming (HLS). Resilience, standardized structure, and broad codec support make TS equally at home in live broadcast chains and file-based recording workflows.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Specialized Output

SPX serves speech-optimized Speex for VoIP and voice applications. Extract the exact format your workflow requires from TS sources.

Cloud Processing

Extraction runs on our servers — no specialized tools needed on your machine.

Secure Handling

Uploaded TS files are deleted after conversion. SPX outputs are removed within 24 hours.

How to convert TS to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

TS (MPEG Transport Stream) is a standard container format specified as part of the MPEG-2 systems layer (ISO/IEC 13818-1), standardized by the Moving Picture Experts Group in 1995. Transport streams are designed for communication and storage environments where data loss or corruption is possible, such as broadcast television, satellite transmission, and network streaming. The format divides content into fixed-size 188-byte packets, each carrying a 4-byte header with synchronization, error indication, and stream identification information. This packet structure enables receivers to rapidly resynchronize after signal interruptions, a critical capability for real-time broadcast delivery that distinguishes transport streams from program streams designed for reliable storage media. TS can multiplex multiple programs into a single stream, with Program Specific Information (PSI) tables describing the structure and content of each program. The format supports virtually any audio and video codec, though it most commonly carries MPEG-2 video, H.264, or HEVC alongside AAC, AC-3, or MPEG audio. TS is the backbone of digital television delivery worldwide, used by DVB, ATSC, and ISDB broadcasting standards as well as IPTV and OTT streaming services utilizing HTTP Live Streaming (HLS). Resilience, standardized structure, and broad codec support make TS equally at home in live broadcast chains and file-based recording workflows.
Initial release: 1995
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

Why convert TS to SPX?

SPX provides speech-optimized Speex for VoIP and voice applications. Converting extracts compatible audio data from your TS broadcast recordings.

What software handles SPX?

Specialized audio tools, SoX, and format-specific applications handle SPX files for playback and processing.

Is SPX widely supported?

SPX serves specific use cases. For general audio, MP3, WAV, or FLAC are more broadly compatible.

Can I adjust settings?

Yes — configure sample rate and encoding parameters before converting to match your target system.

Is batch conversion available?

Upload multiple TS files and extract SPX audio from each simultaneously in one session.

TS to SPX Quality Rating

5.0 (1 votes)
You need to convert and download at least 1 file to provide feedback!