PVF to SPX Converter

Re-encode telephony PVF audio as SPX online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

pvf

PVF (Portable Voice Format) is a simple audio file format designed for voice message storage in Linux-based telephony systems, most notably ISDN4Linux and its vbox voicemail application. The format emerged from the European ISDN ecosystem of the late 1990s, when Linux servers increasingly handled PBX and answering machine duties over digital phone lines. PVF files store raw signed 16-bit PCM samples at 8000 Hz mono, preceded by a minimal plain-text header specifying data format and byte ordering. This deliberate simplicity is one of the format's primary strengths — with no compression and a human-readable header, PVF files are trivially easy to parse, pipe, and manipulate using standard Unix tools. The 8 kHz rate matches the Nyquist requirement for telephone-bandwidth speech (300-3400 Hz), making PVF a natural intermediate format for voice processing pipelines. Another advantage is cross-architecture portability: the explicit byte-order declaration means PVF files move between big-endian and little-endian systems without ambiguity. The SoX audio toolkit provides native PVF read/write support, enabling straightforward conversion to modern formats.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Cross-Format Audio

Convert compact PVF audio to SPX — open-source speech codec accessible on modern platforms and devices.

Privacy Protected

Source files are removed right after conversion completes. Converted SPX files are purged within 24 hours automatically.

Browser-Based

The converter runs in your browser. No desktop application or command-line tool needed for the conversion.

How to convert PVF to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

PVF (Portable Voice Format) is a simple audio file format designed for voice message storage in Linux-based telephony systems, most notably ISDN4Linux and its vbox voicemail application. The format emerged from the European ISDN ecosystem of the late 1990s, when Linux servers increasingly handled PBX and answering machine duties over digital phone lines. PVF files store raw signed 16-bit PCM samples at 8000 Hz mono, preceded by a minimal plain-text header specifying data format and byte ordering. This deliberate simplicity is one of the format's primary strengths — with no compression and a human-readable header, PVF files are trivially easy to parse, pipe, and manipulate using standard Unix tools. The 8 kHz rate matches the Nyquist requirement for telephone-bandwidth speech (300-3400 Hz), making PVF a natural intermediate format for voice processing pipelines. Another advantage is cross-architecture portability: the explicit byte-order declaration means PVF files move between big-endian and little-endian systems without ambiguity. The SoX audio toolkit provides native PVF read/write support, enabling straightforward conversion to modern formats.
Developer: ISDN4Linux Project
Initial release: 1997
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

Why convert PVF to SPX?

PVF is a niche telephony voice format. SPX gives your voice recordings broader compatibility with standard players and tools.

What applications open SPX files?

VLC, Speex-enabled apps, and some VoIP systems can handle SPX files. Most are available as free downloads for major operating systems.

Is SPX suitable for music?

No. SPX is optimized for speech and voice. Music loses significant quality — use AAC or MP3 for music content instead.

How fast is the conversion?

Both formats produce manageable file sizes. The PVF to SPX conversion finishes almost instantly on our infrastructure.

Are my files kept private?

PVF uploads are removed right after processing. All SPX output files are cleaned from servers within 24 hours.

Does this work on mobile?

Yes. The converter runs in any browser — smartphones, tablets, and desktops all work for PVF to SPX conversion.