PVF to MP2 Converter

Convert telephony PVF recordings to MP2

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output MP2 audio bitrate. If set to "Custom", the recommended range is ≥320 kbps with a maximum value of 384 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

pvf

PVF (Portable Voice Format) is a simple audio file format designed for voice message storage in Linux-based telephony systems, most notably ISDN4Linux and its vbox voicemail application. The format emerged from the European ISDN ecosystem of the late 1990s, when Linux servers increasingly handled PBX and answering machine duties over digital phone lines. PVF files store raw signed 16-bit PCM samples at 8000 Hz mono, preceded by a minimal plain-text header specifying data format and byte ordering. This deliberate simplicity is one of the format's primary strengths — with no compression and a human-readable header, PVF files are trivially easy to parse, pipe, and manipulate using standard Unix tools. The 8 kHz rate matches the Nyquist requirement for telephone-bandwidth speech (300-3400 Hz), making PVF a natural intermediate format for voice processing pipelines. Another advantage is cross-architecture portability: the explicit byte-order declaration means PVF files move between big-endian and little-endian systems without ambiguity. The SoX audio toolkit provides native PVF read/write support, enabling straightforward conversion to modern formats.
read more

mp2

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Telephony to MP2

Convert compact PVF audio to MP2 — broadcast audio codec accessible on modern platforms and devices.

Any Platform

Convert from any device with a browser — desktops, laptops, tablets, and smartphones all work perfectly.

Server-Side Encoding

No audio tools required locally. Upload PVF, get MP2 back — all processing runs on our cloud infrastructure.

How to convert PVF to MP2

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose mp2 or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your mp2 file right afterwards

About formats

PVF (Portable Voice Format) is a simple audio file format designed for voice message storage in Linux-based telephony systems, most notably ISDN4Linux and its vbox voicemail application. The format emerged from the European ISDN ecosystem of the late 1990s, when Linux servers increasingly handled PBX and answering machine duties over digital phone lines. PVF files store raw signed 16-bit PCM samples at 8000 Hz mono, preceded by a minimal plain-text header specifying data format and byte ordering. This deliberate simplicity is one of the format's primary strengths — with no compression and a human-readable header, PVF files are trivially easy to parse, pipe, and manipulate using standard Unix tools. The 8 kHz rate matches the Nyquist requirement for telephone-bandwidth speech (300-3400 Hz), making PVF a natural intermediate format for voice processing pipelines. Another advantage is cross-architecture portability: the explicit byte-order declaration means PVF files move between big-endian and little-endian systems without ambiguity. The SoX audio toolkit provides native PVF read/write support, enabling straightforward conversion to modern formats.
Developer: ISDN4Linux Project
Initial release: 1997
MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
Initial release: 1993

Frequently Asked Questions

Why convert PVF to MP2?

PVF is a niche telephony voice format. MP2 gives your voice recordings broader compatibility with standard players and tools.

What applications open MP2 files?

VLC, broadcast equipment, and TV/radio systems can handle MP2 files. Most are available as free downloads for major operating systems.

How is the MP2 audio quality?

MP2 provides good quality at standard settings. The output clarity depends on the original PVF recording quality.

How fast is the conversion?

PVF files are typically compact. The conversion to MP2 completes in just a few seconds on our cloud servers.

Are my files kept private?

Your PVF files are erased after conversion completes. MP2 downloads are purged from our servers within 24 hours automatically.

Does this work on mobile?

Yes. The converter runs in any browser — smartphones, tablets, and desktops all work for PVF to MP2 conversion.