IRCAM to WV Converter

Convert IRCAM SDIF recordings to WV format online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.
Adjust the audio volume by selecting a number of decibels. For example, -10 dB decreases the volume by 10 decibels.

ircam

IRCAM sound files originate from the Institut de Recherche et Coordination Acoustique/Musique — one of the world's foremost computer music laboratories, founded by composer Pierre Boulez in Paris. The format was created in the early 1980s to serve the research needs of IRCAM and has since been adopted by academic and artistic communities working at the intersection of science and sound. An IRCAM file begins with a 1024-byte header containing a magic number, sample rate, channel count, and an encoding type field that supports linear PCM (16/32-bit integer and 32-bit float), mu-law, and A-law variants. The header block also accommodates free-form annotation text, allowing researchers to embed experiment metadata directly in the audio file. Because the payload is uncompressed by default, recordings maintain full fidelity through successive analysis and resynthesis cycles — essential in psychoacoustic experimentation. Software such as Csound, libsndfile, and SoX reads and writes the format natively. Key advantages include a well-defined header that eliminates parsing ambiguity, support for floating-point samples essential in scientific DSP work, and deep roots in the computer music community ensuring continued tooling.
read more

wv

WavPack is an open-source audio codec created by David Bryant, with version 1.0 released on August 15, 1998. What sets WavPack apart is its unique hybrid mode: the encoder can simultaneously produce a compact lossy file and a separate correction file that, when combined, reconstruct the original PCM stream bit-for-bit. Users who need portability carry just the lossy file; those who want archival quality keep both. The codec handles PCM audio from 8-bit to 32-bit integer and 32-bit floating point, with sample rates up to 768 kHz — specifications broad enough for DSD content, which WavPack 5 added support for. Compression ratios in pure lossless mode typically reach 40 to 55 percent of the original size, competitive with FLAC and often slightly better on certain material. Multicore encoding in later versions dramatically speeds up processing on modern hardware. The open-source library ships under a BSD license and has been integrated into foobar2000, VLC, FFmpeg, and numerous other tools. WavPack also supports rich metadata through APEv2 tags, embedded cue sheets, and ReplayGain values, covering the organizational needs of even the most meticulous music library.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

IRCAM to WV

Move audio from the academic IRCAM format into WV — making research recordings accessible for audiophile lossless music archival.

No Research Tools Needed

Convert IRCAM files without installing Csound or academic audio tools. Process your research audio from any modern browser.

Simple Process

IRCAM files convert to WV rapidly on our cloud servers. Upload your research audio and receive the output promptly.

How to convert IRCAM to WV

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose wv or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your wv file right afterwards

About formats

IRCAM sound files originate from the Institut de Recherche et Coordination Acoustique/Musique — one of the world's foremost computer music laboratories, founded by composer Pierre Boulez in Paris. The format was created in the early 1980s to serve the research needs of IRCAM and has since been adopted by academic and artistic communities working at the intersection of science and sound. An IRCAM file begins with a 1024-byte header containing a magic number, sample rate, channel count, and an encoding type field that supports linear PCM (16/32-bit integer and 32-bit float), mu-law, and A-law variants. The header block also accommodates free-form annotation text, allowing researchers to embed experiment metadata directly in the audio file. Because the payload is uncompressed by default, recordings maintain full fidelity through successive analysis and resynthesis cycles — essential in psychoacoustic experimentation. Software such as Csound, libsndfile, and SoX reads and writes the format natively. Key advantages include a well-defined header that eliminates parsing ambiguity, support for floating-point samples essential in scientific DSP work, and deep roots in the computer music community ensuring continued tooling.
Developer: IRCAM
Initial release: 1983
WavPack is an open-source audio codec created by David Bryant, with version 1.0 released on August 15, 1998. What sets WavPack apart is its unique hybrid mode: the encoder can simultaneously produce a compact lossy file and a separate correction file that, when combined, reconstruct the original PCM stream bit-for-bit. Users who need portability carry just the lossy file; those who want archival quality keep both. The codec handles PCM audio from 8-bit to 32-bit integer and 32-bit floating point, with sample rates up to 768 kHz — specifications broad enough for DSD content, which WavPack 5 added support for. Compression ratios in pure lossless mode typically reach 40 to 55 percent of the original size, competitive with FLAC and often slightly better on certain material. Multicore encoding in later versions dramatically speeds up processing on modern hardware. The open-source library ships under a BSD license and has been integrated into foobar2000, VLC, FFmpeg, and numerous other tools. WavPack also supports rich metadata through APEv2 tags, embedded cue sheets, and ReplayGain values, covering the organizational needs of even the most meticulous music library.
Developer: David Bryant
Initial release: August 15, 1998

Frequently Asked Questions

Why convert IRCAM to WV?

WV provides lossless codec with hybrid option. Converting IRCAM research audio to WV makes it accessible for audiophile lossless music archival.

What opens WV files?

Foobar2000, VLC, Winamp can open and play WV files without additional plugins or configuration.

What is IRCAM format?

IRCAM is a specialized academic audio format from the Institut de Recherche et Coordination Acoustique/Musique in Paris, used in computational musicology and acoustic research.

Is quality preserved in the conversion?

The conversion faithfully transfers audio from IRCAM to WV. Output quality depends on the target format encoding settings you choose.

Can I convert multiple IRCAM files?

Upload several IRCAM files and batch-convert them all to WV at once — efficient for processing research audio collections.