IRCAM to OPUS Converter

Encode IRCAM audio as OPUS for modern playback

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the Opus audio bitrate per channel. If set to "Custom", the Opus audio codec supports up to 256 kbit/s per channel with a recommended range of ≥64 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

ircam

IRCAM sound files originate from the Institut de Recherche et Coordination Acoustique/Musique — one of the world's foremost computer music laboratories, founded by composer Pierre Boulez in Paris. The format was created in the early 1980s to serve the research needs of IRCAM and has since been adopted by academic and artistic communities working at the intersection of science and sound. An IRCAM file begins with a 1024-byte header containing a magic number, sample rate, channel count, and an encoding type field that supports linear PCM (16/32-bit integer and 32-bit float), mu-law, and A-law variants. The header block also accommodates free-form annotation text, allowing researchers to embed experiment metadata directly in the audio file. Because the payload is uncompressed by default, recordings maintain full fidelity through successive analysis and resynthesis cycles — essential in psychoacoustic experimentation. Software such as Csound, libsndfile, and SoX reads and writes the format natively. Key advantages include a well-defined header that eliminates parsing ambiguity, support for floating-point samples essential in scientific DSP work, and deep roots in the computer music community ensuring continued tooling.
read more

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

IRCAM to OPUS

Move audio from the academic IRCAM format into OPUS — making research recordings accessible for streaming, VoIP, and web audio.

Accessible Everywhere

Convert IRCAM files without installing Csound or academic audio tools. Process your research audio from any modern browser.

Quick Results

IRCAM files convert to OPUS rapidly on our cloud servers. Upload your research audio and receive the output promptly.

How to convert IRCAM to OPUS

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose opus or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your opus file right afterwards

About formats

IRCAM sound files originate from the Institut de Recherche et Coordination Acoustique/Musique — one of the world's foremost computer music laboratories, founded by composer Pierre Boulez in Paris. The format was created in the early 1980s to serve the research needs of IRCAM and has since been adopted by academic and artistic communities working at the intersection of science and sound. An IRCAM file begins with a 1024-byte header containing a magic number, sample rate, channel count, and an encoding type field that supports linear PCM (16/32-bit integer and 32-bit float), mu-law, and A-law variants. The header block also accommodates free-form annotation text, allowing researchers to embed experiment metadata directly in the audio file. Because the payload is uncompressed by default, recordings maintain full fidelity through successive analysis and resynthesis cycles — essential in psychoacoustic experimentation. Software such as Csound, libsndfile, and SoX reads and writes the format natively. Key advantages include a well-defined header that eliminates parsing ambiguity, support for floating-point samples essential in scientific DSP work, and deep roots in the computer music community ensuring continued tooling.
Developer: IRCAM
Initial release: 1983
Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012

Frequently Asked Questions

Why convert IRCAM to OPUS?

OPUS provides state-of-the-art lossy codec. Converting IRCAM research audio to OPUS makes it accessible for streaming, VoIP, and web audio.

What opens OPUS files?

Modern browsers, Android, VLC, Discord can open and play OPUS files without additional plugins or configuration.

What is IRCAM format?

IRCAM is a specialized academic audio format from the Institut de Recherche et Coordination Acoustique/Musique in Paris, used in computational musicology and acoustic research.

Is quality preserved in the conversion?

The conversion faithfully transfers audio from IRCAM to OPUS. Output quality depends on the target format encoding settings you choose.

Can I convert multiple IRCAM files?

Upload several IRCAM files and batch-convert them all to OPUS at once — efficient for processing research audio collections.