TS to RA Converter

Extract RealAudio audio from TS recordings online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

The codec to encode the audio track. Codec "Without reencoding" copies the audio stream from the input file into output without re-encoding if possible.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

ts

TS (MPEG Transport Stream) is a standard container format specified as part of the MPEG-2 systems layer (ISO/IEC 13818-1), standardized by the Moving Picture Experts Group in 1995. Transport streams are designed for communication and storage environments where data loss or corruption is possible, such as broadcast television, satellite transmission, and network streaming. The format divides content into fixed-size 188-byte packets, each carrying a 4-byte header with synchronization, error indication, and stream identification information. This packet structure enables receivers to rapidly resynchronize after signal interruptions, a critical capability for real-time broadcast delivery that distinguishes transport streams from program streams designed for reliable storage media. TS can multiplex multiple programs into a single stream, with Program Specific Information (PSI) tables describing the structure and content of each program. The format supports virtually any audio and video codec, though it most commonly carries MPEG-2 video, H.264, or HEVC alongside AAC, AC-3, or MPEG audio. TS is the backbone of digital television delivery worldwide, used by DVB, ATSC, and ISDB broadcasting standards as well as IPTV and OTT streaming services utilizing HTTP Live Streaming (HLS). Resilience, standardized structure, and broad codec support make TS equally at home in live broadcast chains and file-based recording workflows.
read more

ra

RealAudio is a proprietary audio format developed by RealNetworks and first released in 1995 as one of the earliest technologies enabling real-time audio streaming over the internet. During the dial-up era, RealAudio was genuinely revolutionary — it let users listen to audio as it downloaded rather than waiting for the entire file, a paradigm shift when a three-minute song could take 30 minutes to transfer. The format evolved through multiple codec generations: early versions used low-bitrate speech codecs for 14.4 kbps modems, while later iterations (RealAudio 10, built on AAC) delivered near-CD quality. RA files support constant and variable bitrate encoding, adaptive multi-bitrate streaming, and buffering algorithms designed to minimize playback interruptions on unreliable connections. At its peak, RealPlayer was installed on hundreds of millions of PCs, and broadcasters like the BBC and NPR relied on RealAudio for online streams. A lasting technical contribution was the adaptive bitrate streaming concept that influenced later standards like HLS and DASH. Though supplanted by modern codecs, vast archives of RA content from early web radio still exist and need conversion for playback on current devices.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Specialized Output

RA serves compact RealAudio for legacy streaming platforms. Extract the exact format your workflow requires from TS sources.

Cloud Processing

Extraction runs on our servers — no specialized tools needed on your machine.

Secure Handling

Uploaded TS files are deleted after conversion. RA outputs are removed within 24 hours.

How to convert TS to RA

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose ra or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your ra file right afterwards

About formats

TS (MPEG Transport Stream) is a standard container format specified as part of the MPEG-2 systems layer (ISO/IEC 13818-1), standardized by the Moving Picture Experts Group in 1995. Transport streams are designed for communication and storage environments where data loss or corruption is possible, such as broadcast television, satellite transmission, and network streaming. The format divides content into fixed-size 188-byte packets, each carrying a 4-byte header with synchronization, error indication, and stream identification information. This packet structure enables receivers to rapidly resynchronize after signal interruptions, a critical capability for real-time broadcast delivery that distinguishes transport streams from program streams designed for reliable storage media. TS can multiplex multiple programs into a single stream, with Program Specific Information (PSI) tables describing the structure and content of each program. The format supports virtually any audio and video codec, though it most commonly carries MPEG-2 video, H.264, or HEVC alongside AAC, AC-3, or MPEG audio. TS is the backbone of digital television delivery worldwide, used by DVB, ATSC, and ISDB broadcasting standards as well as IPTV and OTT streaming services utilizing HTTP Live Streaming (HLS). Resilience, standardized structure, and broad codec support make TS equally at home in live broadcast chains and file-based recording workflows.
Initial release: 1995
RealAudio is a proprietary audio format developed by RealNetworks and first released in 1995 as one of the earliest technologies enabling real-time audio streaming over the internet. During the dial-up era, RealAudio was genuinely revolutionary — it let users listen to audio as it downloaded rather than waiting for the entire file, a paradigm shift when a three-minute song could take 30 minutes to transfer. The format evolved through multiple codec generations: early versions used low-bitrate speech codecs for 14.4 kbps modems, while later iterations (RealAudio 10, built on AAC) delivered near-CD quality. RA files support constant and variable bitrate encoding, adaptive multi-bitrate streaming, and buffering algorithms designed to minimize playback interruptions on unreliable connections. At its peak, RealPlayer was installed on hundreds of millions of PCs, and broadcasters like the BBC and NPR relied on RealAudio for online streams. A lasting technical contribution was the adaptive bitrate streaming concept that influenced later standards like HLS and DASH. Though supplanted by modern codecs, vast archives of RA content from early web radio still exist and need conversion for playback on current devices.
Developer: RealNetworks
Initial release: April 1995

Frequently Asked Questions

Why convert TS to RA?

RA provides compact RealAudio for legacy streaming platforms. Converting extracts compatible audio data from your TS broadcast recordings.

What software handles RA?

Specialized audio tools, SoX, and format-specific applications handle RA files for playback and processing.

Is RA widely supported?

RA serves specific use cases. For general audio, MP3, WAV, or FLAC are more broadly compatible.

Can I adjust settings?

Yes — configure sample rate and encoding parameters before converting to match your target system.

Is batch conversion available?

Upload multiple TS files and extract RA audio from each simultaneously in one session.