M2TS to MP2 Converter

Extract MPEG Audio Layer 2 from M2TS Blu-ray video

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output MP2 audio bitrate. If set to "Custom", the recommended range is ≥320 kbps with a maximum value of 384 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

m2ts

M2TS (MPEG-2 Transport Stream) is a container format used primarily for multiplexing audio, video, and other data on Blu-ray Disc media. The format is specified as part of the Blu-ray Disc Audio-Video (BDAV) standard developed by the Blu-ray Disc Association, with commercial Blu-ray products launching in 2006. M2TS files wrap content in MPEG-2 transport stream packets with an additional 4-byte timestamp header prepended to each 188-byte packet, resulting in 192-byte packets that enable more precise timing and error recovery during optical disc playback. This extended packet structure helps maintain synchronization when dealing with the variable read speeds inherent to disc-based media. M2TS supports the major Blu-ray video codecs including H.264/AVC, MPEG-2, and VC-1, alongside audio formats such as Dolby TrueHD, DTS-HD Master Audio, and LPCM for lossless surround sound. The container is also used by AVCHD camcorders for recording high-definition footage, making it common in both consumer disc playback and video production workflows. M2TS files preserve chapter markers, subtitle streams, and interactive menu data within the transport stream. Reliable synchronization mechanisms and support for high-quality codecs make M2TS well-suited for archiving high-definition content where preserving full source quality is essential.
read more

mp2

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Broadcast Audio

MP2 is the broadcast standard for digital TV and radio. Extract audio from M2TS Blu-ray for professional broadcasting workflows.

Blu-ray to Broadcast

Pull audio from M2TS and encode as MP2 — ready for DVB television, DAB radio, and broadcast playout systems.

Server Processing

Audio extraction and MP2 encoding run on our cloud servers. Your workstation stays available for other tasks.

How to convert M2TS to MP2

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose mp2 or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your mp2 file right afterwards

About formats

M2TS (MPEG-2 Transport Stream) is a container format used primarily for multiplexing audio, video, and other data on Blu-ray Disc media. The format is specified as part of the Blu-ray Disc Audio-Video (BDAV) standard developed by the Blu-ray Disc Association, with commercial Blu-ray products launching in 2006. M2TS files wrap content in MPEG-2 transport stream packets with an additional 4-byte timestamp header prepended to each 188-byte packet, resulting in 192-byte packets that enable more precise timing and error recovery during optical disc playback. This extended packet structure helps maintain synchronization when dealing with the variable read speeds inherent to disc-based media. M2TS supports the major Blu-ray video codecs including H.264/AVC, MPEG-2, and VC-1, alongside audio formats such as Dolby TrueHD, DTS-HD Master Audio, and LPCM for lossless surround sound. The container is also used by AVCHD camcorders for recording high-definition footage, making it common in both consumer disc playback and video production workflows. M2TS files preserve chapter markers, subtitle streams, and interactive menu data within the transport stream. Reliable synchronization mechanisms and support for high-quality codecs make M2TS well-suited for archiving high-definition content where preserving full source quality is essential.
Initial release: 2006
MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
Initial release: 1993

Frequently Asked Questions

Why convert M2TS to MP2?

MP2 is the standard audio codec for DAB radio and DVB television broadcasting. It is required by many broadcast workflows.

What plays MP2 files?

VLC, foobar2000, Windows Media Player, and broadcast playout systems handle MP2 audio without additional codecs.

How does MP2 differ from MP3?

MP2 uses less complex encoding, making it more robust for broadcast. MP3 compresses better but is more prone to artifacts at low rates.

Is MP2 good for broadcast?

MP2 is the primary audio format for European digital broadcasting (DVB, DAB). It is the industry-standard choice for TV and radio.

Is extraction fast?

Audio extraction skips video processing. MP2 encoding from M2TS is quick and efficient on our servers.

M2TS to MP2 Quality Rating

5.0 (1 votes)
You need to convert and download at least 1 file to provide feedback!