IMA to SPX Converter

Move gaming and embedded IMA sound into SPX format

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

ima

IMA ADPCM (Adaptive Differential Pulse-Code Modulation) is a compact audio coding standard published by the Interactive Multimedia Association in 1992, addressing the need for a lightweight, royalty-free compression scheme suitable for early multimedia PCs and embedded devices. The algorithm encodes each sample as a 4-bit nibble representing the quantized difference from the previous sample, while an adaptive step-size table adjusts dynamically to track signal amplitude — delivering a fixed 4:1 compression ratio over 16-bit PCM. Decoding requires only an integer multiply-add per sample and a small lookup table, so even modest 1990s CPUs could decompress in real time without dedicated DSP. The format became deeply embedded in the multimedia landscape: Microsoft adopted it as a standard ACM codec for WAV files, game engines relied on it for sound effects, and telephony equipment used it for voice storage. Its advantages are enduring: predictable 4:1 size reduction simplifies buffer allocation in constrained environments, the decode path runs on 8-bit microcontrollers, and the open specification made IMA ADPCM one of the most broadly implemented audio codecs in computing history.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

IMA to SPX Bridge

Transform IMA recordings into SPX — bringing headerless audio into a format with real-world usability.

File Privacy

Your IMA files are erased immediately after processing. SPX results are cleaned from our servers within 24 hours.

Server-Side Encoding

No audio tools required locally. Upload IMA, get SPX back — all processing runs on our cloud infrastructure.

How to convert IMA to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

IMA ADPCM (Adaptive Differential Pulse-Code Modulation) is a compact audio coding standard published by the Interactive Multimedia Association in 1992, addressing the need for a lightweight, royalty-free compression scheme suitable for early multimedia PCs and embedded devices. The algorithm encodes each sample as a 4-bit nibble representing the quantized difference from the previous sample, while an adaptive step-size table adjusts dynamically to track signal amplitude — delivering a fixed 4:1 compression ratio over 16-bit PCM. Decoding requires only an integer multiply-add per sample and a small lookup table, so even modest 1990s CPUs could decompress in real time without dedicated DSP. The format became deeply embedded in the multimedia landscape: Microsoft adopted it as a standard ACM codec for WAV files, game engines relied on it for sound effects, and telephony equipment used it for voice storage. Its advantages are enduring: predictable 4:1 size reduction simplifies buffer allocation in constrained environments, the decode path runs on 8-bit microcontrollers, and the open specification made IMA ADPCM one of the most broadly implemented audio codecs in computing history.
Initial release: 1992
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

Why convert IMA to SPX?

IMA ADPCM is headerless and hard to use outside embedded systems. SPX provides a proper format with broad compatibility.

What applications open SPX files?

VLC, Speex-enabled apps, and some VoIP systems can handle SPX files. Most are available as free downloads for major operating systems.

Is SPX suitable for music?

No. SPX is optimized for speech and voice. Music loses significant quality — use AAC or MP3 for music content instead.

How fast is the conversion?

Both formats produce manageable file sizes. The IMA to SPX conversion finishes almost instantly on our infrastructure.

Are my files kept private?

Uploaded IMA files are deleted immediately after conversion. SPX results are automatically erased from our servers within 24 hours.

Do I need to register?

No account required. Upload your file, convert, and download the result directly from your browser at convertio.tools.