CVSD to SPX Converter

Turn CVSD audio into SPX — no software installation needed

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

cvsd

CVSD (Continuously Variable Slope Delta modulation) is a voice digitization method standardized for military and telephony use by NATO and the CCITT during the 1970s. It encodes differences between consecutive samples as a single bit — 1 if the current sample exceeds the prediction, 0 otherwise — while a syllabic companding filter adjusts step size by monitoring runs of identical bits. Operating at 16 to 64 kbps, CVSD balances voice intelligibility against bandwidth, making it the encoding of choice for secure military links and tactical radio systems. The bitstream can be decoded with straightforward hardware, originally built into dedicated integrated circuits. One advantage is implementation simplicity — encoders and decoders need minimal resources, enabling real-time processing on low-power embedded hardware. Robustness under noisy conditions is another strength, as single-bit errors affect only local samples rather than corrupting entire frames. SoX provides software encoding and decoding support, letting modern systems work with legacy CVSD recordings from military archives and vintage telecommunications infrastructure.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Fast Cloud Engine

Conversion runs on our servers, not your device — so even large CVSD recordings transform to SPX without slowing your machine.

Speedy Output

Most CVSD to SPX conversions complete in seconds. The cloud-based engine processes recordings rapidly regardless of length.

Broader Reach

CVSD is a niche legacy format with minimal support. Converting to SPX brings your audio into a format recognized by VLC and many other tools.

How to convert CVSD to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

CVSD (Continuously Variable Slope Delta modulation) is a voice digitization method standardized for military and telephony use by NATO and the CCITT during the 1970s. It encodes differences between consecutive samples as a single bit — 1 if the current sample exceeds the prediction, 0 otherwise — while a syllabic companding filter adjusts step size by monitoring runs of identical bits. Operating at 16 to 64 kbps, CVSD balances voice intelligibility against bandwidth, making it the encoding of choice for secure military links and tactical radio systems. The bitstream can be decoded with straightforward hardware, originally built into dedicated integrated circuits. One advantage is implementation simplicity — encoders and decoders need minimal resources, enabling real-time processing on low-power embedded hardware. Robustness under noisy conditions is another strength, as single-bit errors affect only local samples rather than corrupting entire frames. SoX provides software encoding and decoding support, letting modern systems work with legacy CVSD recordings from military archives and vintage telecommunications infrastructure.
Developer: CCITT / NATO
Initial release: 1970
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

What makes SPX a better choice than CVSD?

CVSD is a limited to telephone-grade speech quality and tools. Converting to SPX gives you designed specifically for speech.

What can I use to play SPX?

You can open SPX with VLC, Audacity, Foobar2000, and Speex-compatible VoIP clients.

Does CVSD to SPX conversion affect quality?

Since CVSD is already a low-quality telephony format, converting to SPX typically improves accessibility without meaningful further loss.

Can I do this conversion from my phone?

Yes. The online converter is platform-independent — use it from any computer, tablet, or smartphone with a web browser.

Are there limits on CVSD to SPX conversion?

Standard conversions work without restrictions for typical use. Premium plans provide additional speed and capacity for large workloads.

Is registration needed for this conversion?

No account is needed for standard conversions. Simply upload your CVSD recording, choose SPX, and download the result.