SPH to OPUS Converter

High-fidelity SPH to OPUS conversion tool

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the Opus audio bitrate per channel. If set to "Custom", the Opus audio codec supports up to 256 kbit/s per channel with a recommended range of ≥64 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

sph

SPH is the file extension for audio stored in the NIST SPHERE (SPeech HEader REsources) format, a standard created by the U.S. National Institute of Standards and Technology around 1990. Built for speech research, SPH files carry a 1024-byte ASCII header packed with metadata — database identifiers, channel counts, sample rates, byte ordering, and compression type — making every recording self-describing. The underlying audio is typically 16-bit linear PCM sampled at 16 kHz, though other configurations are permitted. Researchers at NIST, DARPA, and universities worldwide rely on SPH for distributing speech corpora such as TIMIT, Switchboard, and the LDC collections that underpin modern automatic speech recognition systems. A key advantage is that the human-readable header lets scripts parse recording metadata without binary decoding. The format's strict standardization also eliminates ambiguity when sharing datasets across institutions and platforms. Because SPH files store uncompressed PCM, they preserve full audio fidelity — critical when training acoustic models where even small artifacts can skew results.
read more

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Batch Processing

Upload a collection of SPH files and convert them all to OPUS at once. Batch mode processes everything simultaneously.

Data Protected

Uploaded SPH files are wiped immediately after processing. Resulting OPUS outputs are deleted automatically within 24 hours.

Clean Output

Converting SPH to OPUS maintains your recording quality. The engine handles speech audio data with precision and accuracy.

How to convert SPH to OPUS

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose opus or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your opus file right afterwards

About formats

SPH is the file extension for audio stored in the NIST SPHERE (SPeech HEader REsources) format, a standard created by the U.S. National Institute of Standards and Technology around 1990. Built for speech research, SPH files carry a 1024-byte ASCII header packed with metadata — database identifiers, channel counts, sample rates, byte ordering, and compression type — making every recording self-describing. The underlying audio is typically 16-bit linear PCM sampled at 16 kHz, though other configurations are permitted. Researchers at NIST, DARPA, and universities worldwide rely on SPH for distributing speech corpora such as TIMIT, Switchboard, and the LDC collections that underpin modern automatic speech recognition systems. A key advantage is that the human-readable header lets scripts parse recording metadata without binary decoding. The format's strict standardization also eliminates ambiguity when sharing datasets across institutions and platforms. Because SPH files store uncompressed PCM, they preserve full audio fidelity — critical when training acoustic models where even small artifacts can skew results.
Initial release: 1990
Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012

Frequently Asked Questions

Why convert SPH to OPUS?

SPH is a static archival format unfit for streaming. Opus delivers cutting-edge compression with ultra-low latency for real-time audio.

What can open OPUS audio?

Open OPUS with VLC, foobar2000, Chrome, Firefox, or any Opus-supported audio player.

Can I change audio settings before converting SPH to OPUS?

Yes — you can modify sample rate, bit depth, and channel settings before starting the SPH to OPUS conversion.

Is SPH to OPUS conversion lossless?

When the target is a lossless format, all audio data from your SPH recording is preserved. Lossy targets apply perceptual compression.

Can I convert many SPH files to OPUS in one batch?

Yes — upload all your SPH files at once and convert them all to OPUS simultaneously. Batch processing is fully supported.

How secure is SPH to OPUS conversion?

Your SPH files are erased right after conversion finishes. The resulting OPUS outputs are deleted from servers within 24 hours.