G3 to DOT Converter

G3 is a monochrome image format based on the ITU-T Group 3 facsimile coding standard (Recommendation T.4), ratified by the CCITT in 1980 as the universal compression method for fax transmission over telephone networks. G3 files contain 1-bit (black and white) image data encoded using Modified Huffman (MH) one-dimensional coding, where each scanline is independently compressed by replacing runs of consecutive white or black pixels with variable-length codewords from a predefined Huffman table optimized for typical document content. The standard also defines an optional two-dimensional coding mode (Modified READ) that encodes each line as differences from the previous line, achieving better compression for pages with vertical redundancy. Standard G3 resolution is 204 pixels per inch horizontally and either 98 (standard) or 196 (fine) pixels per inch vertically, producing the characteristic slightly-stretched appearance of received fax documents. The encoding was carefully optimized for the real-time transmission constraints of 1980s modems operating at 2400 to 14400 bps, where encoding and decoding speed had to match the communication channel rate. One advantage is universal telecommunications compatibility: Group 3 encoding remains the mandatory baseline codec for every fax machine manufactured, ensuring that G3 image data can be transmitted to or received from any fax device worldwide. The format's efficiency for document content is another strength — the Huffman tables were statistically tuned to the run-length distributions found in business documents, and typical pages compress to under 30 KB. G3 files are supported by LibreOffice, ImageMagick, and fax server software.